Add Leaf

When the Add Leaf command is selected in the Parametric Frame Builder Action list box, the settings group for that command displays directly to the right of the Action list box.

The Add Leaf command manages settings to add a leaf to a frame.

Setting	Description
Add Leaf command settings group	The following settings are available when the Add Leaf command is selected. ID — Enter the ID number of the section of the frame into which the leaf is to be placed. Window or Door — Applies the leaf to a door or a window. Remove Bottom Rail — Removes the bottom rail of the frame when on. Typically used for doors. Plain — Creates a plain leaf, as opposed to one with glazing, when on. Type — Sets the leaf type and indicates the swing type including single, double, hopper, and awning. Direction — Select the direction of the opening leaf; inward, outward, or inward and outward. This setting is available for the first eight leaf types only.

Setting

Description

Add Leaf command settings group

The following settings are available when the Add Leaf command is selected.

ID — Enter the ID number of the section of the frame into which the leaf is to be placed.
Window or Door — Applies the leaf to a door or a window.
Remove Bottom Rail — Removes the bottom rail of the frame when on. Typically used for doors.
Plain — Creates a plain leaf, as opposed to one with glazing, when on.
Type — Sets the leaf type and indicates the swing type including single, double, hopper, and awning.
Direction — Select the direction of the opening leaf; inward, outward, or inward and outward.
This setting is available for the first eight leaf types only.